Taking Pictures While Adjusting A Setting Automatically (Bracket Recording) - Panasonic DMC-FZ2500 Operating Instructions Manual

5. 4K Photo and Drive Settings
Taking Pictures While Adjusting a Setting
Automatically
Applicable modes:
You can take multiple pictures while automatically adjusting a setting by pressing the
shutter button.
1
Select the menu.
>
MENU
(Exposure Bracket)
(Aperture Bracket)
(Focus Bracket)
(White Balance Bracket)
¢ Available in Aperture-Priority AE Mode or when the ISO sensitivity is set to [AUTO] in
Manual Exposure Mode.
2
Press 3/4 to select [More settings] and then press [MENU/SET].
• For information on [More settings], refer to the page that describes each function.
• Press the shutter button halfway to exit the menu.
3
Focus on the subject and take a picture.
• When Exposure Bracket is selected, the bracket display flashes until all of the pictures
you have set are taken. If you change the bracket settings or turn off the camera before
all of the pictures you have set are taken, the camera restarts recording from the first
picture.
To cancel [Bracket Type]
∫
Select [OFF] in step
(Bracket Recording)
(P51)
[Rec] > [Bracket]> [Bracket Type]
¢
1
.
Press the shutter button to perform recording while
adjusting the exposure.
Press the shutter button to perform recording while
adjusting the aperture.
Press the shutter button to perform recording while
adjusting the focus position.
Press the shutter button once to take three pictures
with different white balance settings automatically.
(P110)
139
(P140)
(P141)
(P142)