Panasonic DMC-FZ2500 Operating Instructions Manual page 181

Hide thumbs Also See for DMC-FZ2500:
Table of Contents

Advertisement

7. Recording Motion Pictures
Set whether or not to output control informations for recording start/stop to
external devices connected to the HDMI socket.
[ON]/[OFF]
• [HDMI Recording Control] can only be set when [HDMI Time Code Output]
[HDMI
Recording
• Control information is output when pressing the motion picture button or
Control]
• Control information can be output only when outputting a time code to
• Only compatible external devices can be controlled.
¢1 This is not displayed on the camera's screen when using the Wi-Fi function during HDMI
output.
¢2 During HDMI output, motion pictures cannot be recorded and the Wi-Fi function is disabled.
• When you use the HDMI output during recording, the image may be displayed with a time lag.
• When the camera is connected to
picture, if you use one of the following settings, the angle of view becomes even narrower
than normal:
– A size setting of [4K] or [C4K] in [Rec Quality]
– [4K Live Cropping]
• If you output an image being played back, it will be output with the [HDMI Mode (Play)] setting
in [TV Connection] in the [Setup] menu.
• When using the Auto Focus Mode [
windowed mode ([PIP]).
• [Aspect Ratio] in the [Rec] menu is fixed to [16:9].
• [Sound Output] in the [Motion Picture] menu is fixed to [REC SOUND].
• Electronic sounds and electronic shutter sounds are muted.
• When you check the image and sound from the TV connected to the camera, the microphone
of the camera may pick up the sound from the speakers of the TV, producing an abnormal
sound (audio feedback). If this occurs, move the camera away from the TV or lower the
volume on the TV.
• The scene selection screen in Scene Guide Mode is not output through the HDMI connection.
• This function is not available in the following cases:
– During panorama picture recording
– When recording 4K photos
– When recording using [Post Focus]
is set to [ON] in Creative Video Mode.
shutter button, even if the motion picture cannot be recorded (such as
when there is no card inserted into this unit).
video from the HDMI output during recording.
an external monitor or a TV
] or MF assist, the screen cannot be enlarged in
(P233)
181
that supports 4K motion

Advertisement

Table of Contents
loading

Table of Contents