Table of Contents
Advertisement
9. Using Menu Functions
[Wind Noise Canceller]
Applicable modes:
This will reduce the wind noise coming into the built-in microphone while maintaining
sound quality.
>
[Motion Picture] > [Wind Noise Canceller]
MENU
Settings: [HIGH]/[STANDARD]/[OFF]
• [HIGH] effectively reduces the wind noise by minimising the low-pitched sound when a strong
wind is detected.
• [STANDARD] extracts and reduces only the wind noise without deteriorating the sound quality.
• You may not see the full effect depending on the recording conditions.
• This function works only with the built-in microphone.
When an external microphone is connected, [Wind Cut] is displayed.
[Zoom Mic]
Applicable modes:
Coupled to the zoom operation, it will clearly record far sounds with tele, and surrounding
sounds with wide.
>
[Motion Picture] > [Zoom Mic]
MENU
Settings: [ON]/[OFF]
• When set to [ON] and performing zoom, the operation sound may be recorded enhanced in
accordance with the surrounding sounds. Also, audio recording level will be lower compared
to when [OFF].
• The stereo effect of the audio is reduced when the picture is enlarged.
• This function works only with the built-in microphone.
217
Advertisement
Table of Contents
