Table of Contents
Advertisement
4. Focus, Brightness (Exposure) and Colour tone Settings
Setting up position of the AF area/changing size of the AF area
Applicable modes:
When [š], [
], [Ø], or [
position and size of the AF area.
• Perform the operation after cancelling the touch shutter function.
• You can also display the AF area setting screen by touching the recording screen. (When
[Touch AF] of [Touch Settings] in the [Custom] menu is set to [AF])
• The spot metering target can also be moved to match the AF area when the [Metering Mode]
(P198)
is set to [
Not available in these cases:
• This function is not available in the following cases:
– When using the Digital Zoom
– When [4K Live Cropping] is set
When selecting [š], [Ø]
Position and size of the AF area can be changed.
1
Press 2 (
).
2
Select [š] or [Ø] and press 4.
3
Change the position and size of the AF area.
Button
operation
3/4/2/1
[DISP.]
4
Press [MENU/SET] to set.
• AF area with the same function as [Ø] is displayed in the touched position, when the [š]
is selected.
Setting of the AF area is cleared when [MENU/SET] is pressed or [
] in Auto Focus Mode is selected, you can change the
].
Touch
operation
Touching
Pinching out/in Enlarges/reduces the AF area in small steps.
s
[Reset]
Description of operation
Moves the AF area.
Enlarges/reduces the AF area in large steps.
Resets the AF area back to the centre.
• If you press the button again, the frame size will
be reset to the default setting.
96
] is touched.
Advertisement
Table of Contents
