Panasonic DMC-FZ2500 Operating Instructions Manual page 313

Hide thumbs Also See for DMC-FZ2500:
Table of Contents

Advertisement

12. Others
• When an external flash is attached, the following functions are available in addition to the
functions available with the built-in flash.
– Aperture Bracket
– Focus Bracket
• You can set the aperture value, the shutter speed and the ISO sensitivity on the camera even
when attaching the external flash.
• If you record at close range with a wide angle, light from the flash may be blocked by the lens,
darkening the lower part of the screen.
• Do not use commercially available external flashes with high-voltage synchro terminals,
reverse polarity or functions that enable them to communicate with the camera. Doing so may
cause the camera to malfunction or operate incorrectly.
• When attaching the external flash, do not hold only the external flash because it may detach
from the camera.
• Read the operating instructions of the external flash for details.
External Microphone (optional)
Using a stereo shotgun microphone (DMW-MS2: optional) or stereo
microphone (VW-VMS10: optional), you can record sounds with
quality superior to those recorded with the built-in microphone.
Using the stereo shotgun microphone (DMW-MS2: optional), you
can switch between the gun (ultra-directional) recording and the
wide range stereo recording.
Preparations:
• Close the built-in flash, and then turn this unit off.
• Remove the hot shoe cover that is attached to the camera.
Setting the range within which the stereo shotgun microphone (DMW-MS2:
optional) will record sounds
1
Attach the dedicated stereo shotgun microphone to this unit, and then turn this
unit on.
2
Select the menu.
>
MENU
• The menu items are displayed only when the stereo shotgun microphone is connected.
(P51)
[Motion Picture] > [Special Mic.]
(P312)
313

Advertisement

Table of Contents
loading

Table of Contents