Table of Contents
Advertisement
5. 4K Photo and Drive Settings
3
(When [Range Merging] is selected)
Touch the desired focus area.
• Specify at least two areas.
• In-focus areas between the two areas will also be
selected, and the combined in-focus area will be indicated.
• Grey areas indicate areas that may, if selected, cause the
merged picture to look unnatural and areas that cannot be
selected.
• Touch the focus area again to cancel the selection.
• Dragging the screen allows you to select multiple areas.
Button
operation
3/4/2/1
[Fn5]
[DISP.]
[MENU/SET]
4
Touch [
] to merge the pictures and save the resulting picture.
• The picture will be saved in JPEG format. Recording information (Exif information) of the
original picture with the closest focus distance, including the shutter speed, aperture, and ISO
sensitivity, will also be recorded to the new picture.
• The camera may automatically correct the misalignments of pictures caused by camera
shake. If they are corrected, the angle of view becomes slightly narrower when pictures are
merged.
• Pictures may be merged into an unnatural picture in the following cases:
– The subject moved.
– The distance to the subject was great.
– Pictures are too defocused (If you take pictures with a larger aperture value, the resulting
picture may look less unnatural.)
• The Focus Stacking function works only for images recorded with the camera using the Post
Focus function.
Touch
Description of operation
operation
Touching
Selects an area.
[Set/Cancel] Specifies/cancels an area.
Selects all areas.
[All]
(Before selecting areas)
Cancels all selections.
[Reset]
(After selecting areas)
Merges pictures and saves
the resulting picture.
131
Fn5
Set/Cancel
Reset
Fn5
Set/Cancel
Reset
Advertisement
Table of Contents
