Table of Contents
Advertisement
7. Recording Motion Pictures
Changing the Snap Movie settings
∫
Select the menu.
(P51)
>
[Motion Picture] > [Snap Movie] > [SET]
MENU
[Record time]
[Pull Focus]
[Fade]
• Motion pictures recorded with [WHITE-IN] or [BLACK-IN] are displayed as all-white or
all-black thumbnails in Playback Mode.
• If you assign [Snap Movie] to [Fn Button Set] (P55), you can display a screen that lets you
switch [Snap Movie] between [ON]/[OFF] by pressing the assigned function button. If you
press [DISP.] while the screen is displayed, you can change the settings for Snap Movie.
• [Snap Movie] will be set to [OFF] when you connect to Wi-Fi with [Remote Shooting & View].
• This function is not available in the following cases:
Not available in these cases:
– [Miniature Effect] (Creative Control Mode)
– When the drive mode is set to 4K Photo
– When the drive mode is set to [Post Focus]
– When [Slow/Quick] is set
– When [Dolly Zoom] is set
– When [4K Live Cropping] is set
– When [Variable Frame Rate] is set
– When [System Frequency] is set to [24.00 Hz (CINEMA)]
Sets the recording time of motion pictures.
Allows dramatic imaging expression by shifting focus gradually at the start
of recording.
(P167)
Adds a fade-in (gradual appearance) effect to an image and audio as
recording starts or adds a fade-out (gradual disappearance) effect to them
as recording ends.
[WHITE-IN]/[WHITE-OUT]:
Adds a fade-in or fade-out effect that uses a white screen.
[BLACK-IN]/[BLACK-OUT]:
Adds a fade-in or fade-out effect that uses a black screen.
[COLOR-IN]/[COLOR-OUT]:
Adds an effect that fades in from black-and-white to colour or an effect that
fades out from colour to black-and-white. Audio will be recorded normally.
[OFF]
166
Advertisement
Table of Contents
