Table of Contents
Advertisement
Taking Pictures While Adjusting a Setting
Automatically (Bracket Recording)
Applicable modes:
You can take multiple pictures while automatically adjusting a setting by pressing the
shutter button.
1
Select the menu. (P24)
>
MENU
Exposure Bracket
Aperture Bracket
Focus Bracket
¢
White Balance Bracket
White Balance Bracket
¢
(Colour Temperature)
¢ It cannot be selected in Intelligent Auto Plus Mode or Creative Control Mode or when
burst recording is enabled or [Quality] is set to [
2
Press 3/4 to select [More settings] and then press [MENU/SET].
• For information on [More settings], refer to the page that describes each function.
• Press the shutter button halfway to exit the menu.
3
Focus on the subject and take a picture.
∫ To deactivate Bracket
Select [OFF] in step
[Rec] > [Bracket] > [Bracket Type]
1
.
Press the shutter button to perform recording while
adjusting the exposure. (P48)
• This is disabled when recording using the flash.
Press the shutter button to perform recording while
adjusting the aperture. (P48)
• Available in Aperture-Priority AE Mode or when
the ISO sensitivity is set to [AUTO] in Manual
Exposure Mode.
Press the shutter button to perform recording while
adjusting the focus position. (P48)
Press the shutter button once to take three pictures
with different white balance settings automatically.
(P49)
Press the shutter button once to take three pictures
with different White Balance Colour Temperature
values automatically. (P49)
• Available when the White Balance is set to [
[
], [
] or [
2
3
4
], [
].
], or [
].
(ENG) DVQX1072
Recording
],
1
47
Advertisement
Table of Contents
