Table of Contents
Advertisement
9. Using Menu Functions
>
[Custom]
MENU
[Highlight]
[Zebra Pattern]
When the Auto Review function is
activated or when playing back, white
saturated areas appear blinking in
black and white.
• If there are any white saturated
areas, we recommend compensating the exposure
towards negative
(P103)
and then taking the picture again. It may result in a better
quality picture.
• This function is disabled during 4K photo playback,
playback of pictures taken with Post Focus, Multi
Playback, Calendar Playback, or Playback Zoom.
Indicates parts that may be whited out through
overexposure in a zebra pattern.
[ZEBRA1]
set the brightness
Select [SET] to
.
zebra pattern
• You can select a brightness value between [50%] and
[105%]. In [Zebra 2], you can select [OFF]. If you select
[100%] or [105%], only the areas that are already white
saturated are displayed in a zebra pattern. The smaller
the value is, the wider the brightness range to be
processed as a zebra pattern will be.
• If there are any white saturated areas, we recommend
compensating the exposure towards negative
referring to the histogram
picture.
• Displayed zebra patterns will not be recorded.
• If you assign [Zebra Pattern] to [Fn Button Set]
the [Custom] menu, each time you press the function
button to which the setting is assigned, the zebra pattern
toggles as follows:
>
[Zebra 1]
[Zebra 2]
When [Zebra 2] is set to [OFF], the setting toggles in the
>
order of [Zebra 1]
setting quickly.
225
referring to the histogram
[ZEBRA2]
to be processed as a
(P224)
and then taking the
>
[OFF].
[OFF], allowing you to switch the
s
(P224)
s
(P103)
(P55)
in
Advertisement
Table of Contents
