Setting The Flash Functions; Changing The Firing Mode - Panasonic DMC-FZ2500 Operating Instructions Manual

Hide thumbs Also See for DMC-FZ2500:
Table of Contents

Advertisement

6. Stabiliser, Zoom and Flash

Setting the Flash Functions

Changing the firing mode

Applicable modes:
Select whether to set the flash output automatically or manually.
1
Select the menu.
>
MENU
[TTL]
[MANUAL]
2
(When [MANUAL] is selected)
Select the menu.
>
MENU
3
Press 2/1 to select an item and then press [MENU/SET].
• You can set from [1/1] (full brightness) to [1/128] in steps of [1/3].
• This item is available only when the built-in flash is used.
(P51)
[Rec] > [Flash] > [Firing Mode]
The camera automatically sets the flash output.
Set the luminosity ratio of the flash manually. In [TTL] you can shoot the
photograph you want even when shooting dark scenes that may
otherwise be too brightly lit by the flash.
• When [MANUAL] is set, the luminosity ratio ([1/1], etc.) is displayed on
the flash icon on the screen.
[Rec] > [Flash] > [Manual Flash Adjust.]
150

Advertisement

Table of Contents
loading

Table of Contents