Table of Contents
Advertisement
5. 4K Photo and Drive Settings
Taking Pictures Automatically at Set Intervals
Applicable modes:
The camera can automatically take pictures of subjects such as animals or plants as time
elapses and create a motion picture.
1
Set the drive mode dial to [
2
Display the setup screen.
• Switch to [Time Lapse Shot] if it is not selected.
[Start Time]
[Shooting
Interval]/
[Image Count]
• Recording may not be consistent with the set recording interval or the set number of
pictures depending on recording conditions.
3
Press the shutter button halfway.
• The recording screen will be displayed. You can also
perform the same operation by pressing and holding
[
] until the recording screen is displayed.
4
Press the shutter button fully.
• The recording starts automatically.
• During recording standby, the power will turn off automatically if no operation is performed
for a certain period. The Time Lapse Shot is continued even with the power turned off.
When the recording start time arrives, the power turns on automatically.
To turn on the power manually, press the shutter button halfway.
].
(P133)
[Now]
Starts the recording by fully-pressing the shutter button.
Any time up to 23 hours 59 minutes ahead can be set.
Select the item (hour or minute) by pressing
[Start Time
Set]
2/1, set the start time by pressing 3/4, and
then press [MENU/SET].
The recording interval and the number of pictures can be set.
2/1: Select the item (minute/second/number of pictures)
3/4: Setting
[MENU/SET]: Set
([Time Lapse Shot])
(P133)
134
MOV
3:2
AFS
AFS
24 p
L
Advertisement
Table of Contents
