Table of Contents
Advertisement
10. Using the Wi-Fi function
After connecting to a Wi-Fi network, you can perform the following operations by
pressing [Wi-Fi]:
[Terminate the Connection]
[Change the Destination]
[Change Settings for Sending
Images]
¢2
[Register the Current Destination
to Favorite]
¢1
[Network Address]
¢1 These items are not displayed when you send the displayed image to a web service by
pressing 4.
(P284)
¢2 This is not displayed when the destination of [Remote Shooting & View], [Playback on TV] or
[Send Images Stored in the Camera] is set to [Printer].
Describing method
∫
When "select [Select a destination from History]", etc. is
described in a step, perform any of the following operations.
Button operation:
Touch operation:
• The camera cannot be used to connect to a public wireless LAN connection.
• Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless
access point.
• We strongly recommend that you set an encryption to maintain information security.
• It is recommended to use a fully charged battery when sending images.
• When the battery indicator is flashing red, the connection with other equipment may not start
or the connection may be disrupted.
(A message such as [Communication error] is displayed.)
• When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
• Pictures may not be completely sent depending on radio wave conditions. If the connection is
terminated while sending pictures, pictures with missing sections may be sent.
• Do not remove the memory card or battery or move to an area without any reception
while sending images.
Terminates the Wi-Fi connection.
Terminates the Wi-Fi connection, and allows you to select
¢1
a different Wi-Fi connection.
Refer to
Registering the current connection destination or the
connection method, you can easily connect with the same
connection method next time.
Displays the MAC address and IP address of this unit.
Select [Select a destination from
History] with the cursor button, and
then press [MENU/SET].
Touch [Select a destination from
History].
P275
for details.
261
Advertisement
Table of Contents
