Table of Contents
Advertisement
Taking Pictures While Adjusting a Setting
Automatically
Applicable modes:
You can take multiple pictures while automatically adjusting a setting by pressing
the shutter button.
1
Select the menu. (P25)
>
MENU
(Exposure Bracket)
(Aperture Bracket)
(Focus Bracket)
(White Balance Bracket)
¢ Available in Aperture-Priority AE Mode or when the ISO sensitivity is set to
[AUTO] in Manual Exposure Mode.
2
Press 3/4 to select [More settings] and then press [MENU/
SET].
•
For in formation on [More settings], refer to the page that describes each function.
•
When [
] is selected, rotate the rear dial to the right (A-B axis) or left (G-M axis)
to set the range of settings.
•
Press the shutter button halfway to exit the menu.
3
Focus on the subject and take a picture.
∫ To deactivate Bracket
Select [OFF] in step
(Bracket Recording)
[Rec] > [Bracket] > [Bracket Type]
¢
1
.
Press the shutter button to perform
recording while adjusting the exposure.
Press the shutter button to perform
recording while adjusting the aperture.
Press the shutter button to perform
recording while adjusting the focus
position.
Press the shutter button once to take
three pictures with different white
balance settings automatically.
(ENG) SQT1330
Recording
37
Advertisement
Table of Contents
