Table of Contents
Advertisement
2.
Getting Started/Basic Operations
Attaching the Lens Hood
In bright sunlight or backlight, the lens hood will minimise lens flare and ghosting.
The lens hood cuts off excess lighting and improves the picture quality.
• Do not hold the lens hood in a way that twists or bends it.
• Check that the camera is turned off.
• Close the flash.
1
Align the mounting mark under
the long side of the lens hood
with the mounting projection on
the edge of the lens.
A Mounting projection (Lens edge)
B Mounting mark (Lens hood)
2
Screw in the lens hood in the
direction of the arrow.
3
Continue to rotate the lens hood
until you hear a "click" even if
you feel some stiffness, and
then align the mark on the
bottom of the camera.
C Rotate until the marks are aligned
• Check that the lens hood is firmly attached and that it does not appear in the picture.
16
Advertisement
Table of Contents
