Table of Contents
Advertisement
4. Focus, Brightness (Exposure) and Colour tone Settings
Auto Focus Mode
Applicable modes:
This allows the focusing method that suits the positions and number of the subjects to be
selected.
([Face/Eye
Detection])
([Tracking])
([49-Area])
, etc.
([Custom Multi])
([1-Area])
([Pinpoint])
Pressing the shutter button halfway to adjust the composition
When the subject is not in the centre of the composition in [Ø], you can bring the
subject into the AF area, fix the focus and exposure by pressing the shutter button
halfway, move the camera to the composition you want with the shutter button pressed
halfway, and then take the picture.
(Only when the focus mode is set to [AFS].)
The camera automatically detects the person's face
and eyes.
An eye closer to the camera will be in focus, while
the exposure will be optimised for the face.
(When [Metering Mode] is set to [
• Up to 15 faces can be detected. Eyes that can be
detected are only those of the face that is in focus.
• You can change the eye to be in focus.
• Position and size of the AF area can be changed.
The camera focuses on the subject you specify.
The exposure will be optimised for the subject.
(When [Metering Mode] is set to [
Focus and exposure will keep on following the
subject even if it moves. (Dynamic tracking)
Up to 49 AF areas can be focused.
This is effective when a subject is not in the centre
of the screen.
• You can select areas to be in focus.
From among 49 AF areas, you can freely set the
optimum shape of the AF area for the subject.
The camera focuses on the subject in the AF area
on the screen.
• Position and size of the AF area can be changed.
(P96)
You can achieve a more precise focus on a point
that is smaller than [Ø].
If you press the shutter button halfway, the screen
that lets you check the focus will be enlarged.
• The focus position can be set on an enlarged
screen.
(P97)
])
(P93)
].)
(P97)
91
(P96)
(P93)
(P94)
Advertisement
Table of Contents
