Table of Contents
Advertisement
9. Using Menu Functions
[Highlight Shadow]
Applicable modes:
You can adjust the brightness of bright and dark portions on an image while checking the
brightness on the screen.
>
[Rec] > [Highlight Shadow]
MENU
(Standard)
(Raise the contrast)
(Lower the contrast)
(Brighten dark areas)
/
/
(Custom)
1
Rotate the front/rear dial to adjust the brightness of
bright/dark portions.
A Bright portion
B Dark portion
C Preview display
• The rear dial is for adjusting dark areas, and the front
dial is for adjusting bright areas.
• To register a preferred setting, press 3, and select the
destination where the custom setting will be registered to
([Custom1] (
• Adjustments can also be made by dragging the graph.
2
Press [MENU/SET].
• The screen display can be switched by pressing [DISP.] on the brightness adjustment screen.
• Turning off this unit will return the setting adjusted with
setting.
A state with no adjustments is set.
Bright areas are brightened, and dark areas are darkened.
Bright areas are darkened, and dark areas are brightened.
Dark areas are brightened.
Registered custom settings can be applied.
) /[Custom2] (
) /[Custom3] (
199
) ).
/
/
/
back to the default
Advertisement
Table of Contents
