Table of Contents
Advertisement
5. 4K Photo and Drive Settings
Taking Pictures using Burst Mode
Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
1
Set the drive mode dial to [
2
Focus on the subject and take a picture.
• Hold down the shutter button fully to activate the Burst
Mode.
Changing the burst speed
∫
Select the menu.
>
[Rec] > [Burst Rate]
MENU
Burst speed
(pictures/second)
Live View during Burst Mode
¢
¢ Number of recordable pictures
When recording is performed under the test conditions specified by Panasonic.
The burst speed will become slower halfway. However, pictures can be taken until the
capacity of the card becomes full. Depending on recording conditions, the number of burst
pictures that can be taken will be reduced.
• The Burst speed may become slower depending on the following settings.
– [Picture Size] (P196)/[Quality] (P197)/[Sensitivity] (P105)/Focus Mode (P89)/[Focus/Release
Priority]
(P222)
• Refer to
P197
for information about RAW files.
AFS
AFF/AFC
With RAW files
Without RAW files
].
[H]
(High speed)
(Middle speed)
12
7
None
Available
30
Depends on the capacity of the card
114
MOV
3:2
AFS
AFS
H
L
24 p
[M]
[L]
(Low speed)
7
2
7
2
Available
30
30
Advertisement
Table of Contents
