Table of Contents
Advertisement
Recording
Taking Pictures While Adjusting a Setting
Automatically
Recording mode:
You can take multiple pictures while automatically adjusting a setting by pressing
the shutter button.
1
Set the menu
→
(Exposure Bracket)
(Aperture Bracket)
(Focus Bracket)
(White Balance Bracket)
2
Press
to select [More Settings] and then press [MENU/SET]
• For information on [More Settings], refer to the page that describes each
function.
• If [
] is set, rotate the rear dial to set the adjustment range.
• Press the shutter button halfway to exit the menu.
3
Focus on the subject and take a picture
• When Exposure Bracket is selected, the bracket display flashes until all of
the pictures you have set are taken. If you change the bracket settings or turn
off the camera before all of the pictures you have set are taken, the camera
restarts recording from the first picture.
■
To cancel [Bracket]
Select [OFF] in step
44
DVQX1391 (ENG)
(Bracket Recording)
[Rec] → [Bracket] → [Bracket Type]
Press the shutter button to perform recording while adjusting
the exposure.
Press the shutter button to perform recording while adjusting
the aperture.
• Available in Aperture-Priority AE Mode or when the ISO
sensitivity is set to [AUTO] in Manual Exposure Mode.
Press the shutter button to perform recording while adjusting
the focus position.
Press the shutter button once to take three pictures with
different white balance settings automatically.
1
.
Advertisement
Table of Contents
