Table of Contents
Advertisement
Operators Tools
7.1.3.4
Resetting Metered Values and Min/Max Values
From the
Device Front
:
From PC with
®
DIGSI
4
7-24
Figure 7-26 Set Limit Values in DIGSI
Metered values and minimum/maximum values can be reset.
With a device ready for operation, first press the
key to select the menu item 0HDVXUHPHQW, and switch to the list of mea-
Use the
sured values using the
key, select the menu item 5HVHW and switch to the reset possibilities us-
Using the
ing the
key. See Figure 7-27.
5(6(7
!5HV0LQ0D[
!0HWHU UHV
Figure 7-27
Resetting Metered Values and Min/Max Values Using the Front Panel.
Moving up and down in the table is done with the
To reset a values, mark the values using the
key. The reset command is offered as "21".
key. The display confirms with "&KDQJH 2. &RQWLQXH".
Press the
ENTER
Confirm once again with the
Other counters are reset in the same manner.
key to return to the 0($685(0(17 sub-menu; press the
Use the
to the 0$,1 0(18.
Resetting of limit values, metered values, min/max values, or statistics values always
takes place in a group.
®
4
MENU
key. The 0($685(0(17 selection appears.
!
21
21
and
key. The reset is complete.
ENTER
key. The 0$,1 0(18 appears.
and
keys.
keys, and then press the
MENU
key to return
7SJ63 Manual
C53000-G1140-C120-1
ENTER
Advertisement
Table of Contents
