Structure And Operation Of The Configuration Matrix - Siemens siprotec 7SJ63 Instruction Manual

Multi-functional protective relay with local control

Hide thumbs Also See for siprotec 7SJ63:

Table of Contents

Configuration

Relay Configuration:

The relays marked with – must not be used!

Double Command with Single Outputs using two Output Relays with two Contacts Each

Structure and Operation of the Configuration Matrix

7SJ632/3/5/6

Excerpt from the General Circuit Figure for Models 7SJ632, 7SJ633, 7SJ635,

and 7SJ636 with Output Relays R4 ~ R7 and their Configuration per Figure 5-

This section deals with the structure and operation of the configuration matrix. The

configuration matrix can be viewed without making any configuration changes. Infor-

mation characteristics and configuration steps are described in Section 5.2.3, and

configuration is demonstrated in Section 5.2.4.

Configuration of information is performed, using a PC and the DIGSI

gram, via the operator or service interface. The configuration is represented in

4 as a matrix (Figure 5-13). Each row is assigned to relay information. It is

identified by a function number, brief text (display text), an explanation (long text, min-

imized in Figure 5-13), and an information type. The columns give the interfaces which

Switching Device

4 software pro-

7SJ63 Manual

C53000-G1140-C120-1