Table of Contents
Advertisement
Operators Tools
From the
Device Front
:
From PC with
®
DIGSI
4
7-10
Note:
When Trip Log is erased, the fault records and counters for network fault number and
indication data number are set to zero. If, however, a fault record is erased, the
counters are unaffected.
If erasure is desired, first press the
item $QQXQFLDWLRQ is marked.
key to enter the $1181&,$7,21 menu (see Figure 7-1).
Press the
key, select the item 6HW5HVHW, and switch to the sub-menu using the
Using the
key.
Here, select the message group to be erased using the
key. See Figure 7-12.
ENTER
Password No. 5 (for setting changes) is required at this point. After entering the pass-
word and confirming with the
pears. The response "<(6" is the default (Figure 7-12). Confirm with the
the message group should really be erased. If the message group should not be
erased, press the
key so that the response "12" is highlighted, and confirm this an-
swer with the
key. Before confirming with the
ENTER
gled between "<(6" and "12" using the
be pressed to cancel the erasure procedure.
6(75(6(7
!(YHQW /RJ
!7ULS /RJ
Etc
3: 3DUDPHWHU &KDQJH"
$UH \RX VXUH"
!<(6
12
Figure 7-12
Erasing Messages from the Operator Control Panel
When operating with DIGSI
of a personal computer before they are erased from the device. To do this, follow ex-
actly the same steps taken to retrieve the messages. Instead of double clicking on the
message group in the message list to open the group, select the option )LOH → 6DYH
®
in the DIGSI
4 window menu bar. DIGSI
the messages — if one does not exist — and saves the message group in this direc-
key. The 0$,1 0(18 appears. The first menu
MENU
key, the safety question "$UH \RX VXUH?" ap-
ENTER
ENTER
and
keys. Alternatively, the
Press the associated number key to se-
lect the messages to be erased.
Enter Password No. 5 (for setting change)
ENTER
and confirm with
Confirm "<(6" with the
plete the erasing of the selected messag-
es, or switch to "12" with the
cancel the erasure with the
®
4, the device messages can be saved on the hard drive
®
4 then automatically creates a directory for
key, and then press the
key, if
ENTER
key, the responses can be tog-
key can
ESC
ENTER
key and com-
ENTER
key and
key.
ENTER
7SJ63 Manual
C53000-G1140-C120-1
Advertisement
Table of Contents
