Settings
®
Figure 4-22
DIGSI
4, Entering Settings for a Protective Function, example
Changing Setting
Groups
7SJ63 Manual
C53000-G1140-C120-1
Double click on a protective function shown in the smaller window of Figure 4-21 to
obtain a window for entering the general settings associated with the function and the
settings of the protective elements belonging to the function.
The setting groups can be changed during operation using DIGSI
the device, by triggering binary inputs, or via the system interface. The active setting
group is indicated.
&+$1*( *5283
$&7,9( *5283
*URXS $
&+$1*( WR
*URXS $
*URXS $
*URXS %
*URXS &
*URXS '
%LQDU\ ,QSXW
,(&²²
®
Figure 4-23
SIPROTEC
via protocol
4 Device, Changing Setting Groups on the HMI
SIPROTEC 4 Devices
f
®
4, from the HMI on
4-31