Data Connection Settings - CipherLab RS30 Reference Manual

3) A dialog box
auto-synchronization. Tap OK to confirm.
Once auto-sync is enabled, any changes made to your personal account will be
automatically reflected on the mobile computer.

4.1.3. DATA CONNECTION SETTINGS

TURN ON/OFF DATA CONNECTION
To manually turn on/off mobile data connection:
1) Tap Home
2) On the Network settings page, tap Data connection to show a dialog box for
selection.
3) To turn on data connection, tap the radio button for the mobile carrier of interest. To
turn off all data connection, tap Off.
3G DATA CONNECTION
To manually turn on/off 3G mobile data connection:
1) Tap Home
2) On the Network settings page, tap 3G service.
3) Tap Enable 3G to show a dialog box for selection.
4) To enable 3G data connection for a specific mobile carrier, tap the radio button for the
mobile carrier of interest. To turn off all 3G data connection, tap Off. The mobile
computer will thus be limited to 2G networks if data connection is enabled.
2G DATA CONNECTION
To manually turn on/off 2G mobile data connection:
1) Tap Home
2) On the Network settings page, tap 3G service.
3) Tap Network Mode to adjust the network mode.
4) Select the network mode between 2G/3G or 3G only.
Note: To limit data connection to 2G networks, set Network Mode to 2G/3G, and set
Enable 3G to Off.
To limit data connection to 3G networks, set Network Mode to 3G only, and for
Enable 3G, select the mobile carrier you would like to use.
appears confirming
| Settings | More...
| Settings | More...
| Settings | More...
whether you would
| Mobile networks.
| Mobile networks.
| Mobile networks.
Chapter 4 Wireless Radio
like to enable data
71