CipherLab RS30 Reference Manual page 167

Length option
CODE 128
Code 128
Code 128
GS1-128
GS1-128
Separator Character
ISBT-128
ISBT 128
Concatenation
Redundancy
CODE 2 OF 5
Chinese 25
Chinese 25
Discrete 25
Discrete 25
Sets the length of the Code 93 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Switch to enable Code 128 decoding.
Switch to enable GS1-128 decoding.
Enable the function code character separator, which is used
to separate data fields of variable length and application
identifiers of subsequent data fields in concatenated data
strings. Tap the keyboard icon to open a mapping table for
selecting a separator character to replace with.
Switch to enable ISBT 128 decoding.
Sets whether to enable decoding ISBT-128 by performing
concatenation of ISBT data
Disable: Does not perform concatenation
Enable: Performs concatenation on all ISBT-128 barcodes.
Auto-discriminate: Auto-discriminates
barcodes which require concatenation and those which do not need
concatenation.
When "Auto-discriminate" is applied, decide the number of
times of supplementary decoding the same barcode to count
as a valid read. Configurable between 2 and 20
Switch to enable Chinese 2 of 5 decoding.
Switch to enable Discrete 2 of 5 decoding.
2D Imager (SE4500DL)
between the ISBT-128
Max / Min
Length
(4-55)
Enable
Enable
Enable
Enable
None
Enable
Enable
Auto-discrimi
nate
10
Enable
Enable
Enable
Enable
153