CipherLab RS30 Reference Manual page 158

RS30 Mobile Computer
Transmit Check Digit
Convert To EAN-13
GS1 DATABAR
GS1 DataBar-14
GS1 DataBar-14
Convert to UPC/EAN
GS1 DataBar Limited
GS1 DataBar Limited
GS1 DataBar Expanded
GS1 DataBar Expanded Switch to enable GS1 DataBar Expanded decoding.
MSI
MSI
MSI
Length option
Verify Check Digit
Transmit Check Digit
Algorithm
UPC/EAN
EAN-8
EAN-8
Convert to EAN-13
144
Decide whether to include the check digit in the data being
transmitted.
Convert a 14-character Interleaved 25 barcode into EAN-13
if the following requirements are met:
The barcode must have a leading 0 and a valid EAN-13
check digit.
Switch to enable GS1 DataBar-14 decoding.
Strips the leading '010' of GS1 DataBar and converts the
barcode to EAN-13.
Switch to enable GS1 DataBar Limited decoding.
Switch to enable MSI decoding.
Sets the length of the MSI symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
One check digit is mandatory for decoding MSI barcodes.
Select whether a second check digit should be verified. If the
check digits are incorrect, the barcode will not be accepted.
One Check Digit
Two Check Digits
Decide whether to include the check digit in the data being
transmitted.
When two check digits are set for verification, two choices
are available for the pair of check digits.
Modulo10 / Modulo11
Double Modulo 10
Switch to enable EAN-8 decoding.
Checkbox to enable converting EAN-8 to EAN-13 format.
Reference Manual
Disable
Disable
Enable
Enable
Disable
Enable
Enable
Enable
Enable
Enable
Enable
Max / Min
Length
(4-55)
One Check
Digit
Disable
Double
Modulo 10
Enable
Enable
Disable