CipherLab RS30 Reference Manual page 166

RS30 Mobile Computer
Check Digit Option
Transmit Check Digit
Length option
CODE 39
Code 39
Code 39
Trioptic Code 39
Convert to Code 32
Code 32 Prefix
Verify Check Digit
Transmit Check Digit
Support Full ASCII
Length option
CODE 93
Code 93
Code 93
152
Sets whether to verify check digits according to the selected
option. If the check digits are incorrect, the barcode will not
be accepted.
Disable
One Check Digit
Two Check Digits
Selects whether to include check digits in the transmitted
data.
Check Digit Option" must be enabled.
Sets the length of the Code 11 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Switch to enable Code 39 decoding.
Selects whether to decode Trioptic Code 39.
Trioptic Code 39 is a variant of Code 39 used in the marking of
computer tape cartridges. It always contains six characters.
Selects whether to convert decoded data to Italian
Pharmacode.
Prefix character "A" to Code 32 barcodes.
"Convert to Code 32" must be enabled for this to function properly.
Selects whether to verify the Modulo 43 check digit. If the
check digit is incorrect, the barcode will not be accepted.
Decide whether to include the check digit in the data to
transmit.
"Verify Check Digit" must be enabled.
Selects whether to enable Code 39 Full ASCII decoding.
Characters are paired to encode the full ASCII character set.
Sets the length of the Code 39 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Switch to enable Code 93 decoding.
Reference Manual
Disable
Disable
Max / Min
Length
(4-55)
Enable
Enable
Enable
Enable
Disable
Disable
Disable
Disable
Max / Min
Length
(4-55)
Enable
Enable