CipherLab RS30 Reference Manual page 151

Interleaved 25
Interleaved 25
Length option
Verify Check Digit
Transmit Check Digit
GS1 DATABAR
GS1 DataBar-14
GS1 DataBar-14
GS1 DataBar Limited
GS1 DataBar Limited
GS1 DataBar Expanded
GS1 DataBar Expanded Switch to enable GS1 DataBar Expanded decoding.
MSI
MSI
MSI
Length option
Verify Check Digit
Transmit Check Digit
Switch to enable Interleaved 2 of 5 decoding.
Sets the length of the Interleaved 2 of 5 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Decide whether to verify the check digit. If desired, select
one of the algorithms below. If the check digit is incorrect,
the barcode will not be accepted.
Disable
USS Check Digit
OPCC Check Digit
Decide whether to include the check digit in the data being
transmitted.
Switch to enable GS1 DataBar-14 decoding.
Switch to enable GS1 DataBar Limited decoding.
Switch to enable MSI decoding.
Sets the length of the MSI symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
One check digit is mandatory for decoding MSI barcodes.
Select whether a second check digit should be verified. If the
check digits are incorrect, the barcode will not be accepted.
One Check Digit
Two Check Digits
Decide whether to include the check digit in the data being
transmitted.
CCD (SM1)
Enable
Max / Min
Length
(4-55)
Disable
Disable
Enable
Enable
Enable
Enable
Max / Min
Length
(4-55)
One Check
Digit
Disable
137