CipherLab RS30 Reference Manual page 124

RS30 Mobile Computer
Display Mode
Inverse Type
Addon Redundancy
DATA OUTPUT
Data Output allows users to set the way to output decoded data.
To open Data Output settings page:
1) Open Reader Config as described in
2) Tap Data Output.
WHERE TO OUTPUT
Keyboard Emulation setting controls where the decoded data is to be output.
Setting
Keyboard Emulation
110
Enable improved performance
electronic displays and mobile phones.
Decide whether to disable or enable decoding inverse barcodes,
or set as auto.
Functions when "auto-discriminate" is applied for UPC/EAN
addons. Decides the number of times of supplemental decoding
of the same barcode in order to count as a valid read.
Configurable between 2 and 30.
Descriptions
Tap the switch to enable. When enabled, the reader module
treats decoded data as typed text and outputs it to the active
application on the mobile computer. Options are:
None
InputMethod
KeyEvent
for reading
Launch Reader Config.
Reference Manual
barcodes on Deselected
(Disabled)
Regular
only
10
Default
InputMethod