CipherLab RS30 Reference Manual page 150

RS30 Mobile Computer
Code 32 Prefix
Verify Check Digit
Transmit Check Digit
Support Full ASCII
Length option
CODE 93
Code 93
Code 93
Length option
CODE 128
Code 128
Code 128
GS1-128
GS1-128
ISBT 128
ISBT 128
CODE 2 OF 5
Discrete 25
Discrete 25
Length option
136
Prefix character "A" to Code 32 barcodes.
"Convert to Code 32" must be enabled for this to function properly.
Selects whether to verify the Modulo 43 check digit. If the
check digit is incorrect, the barcode will not be accepted.
Decide whether to include the check digit in the data to
transmit.
"Verify Check Digit" must be enabled.
Selects whether to enable Code 39 Full ASCII decoding.
Characters are paired to encode the full ASCII character set.
Sets the length of the Code 39 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Switch to enable Code 93 decoding.
Sets the length of the Code 93 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Switch to enable Code 128 decoding.
Switch to enable GS1-128 decoding.
Switch to enable ISBT 128 decoding.
Switch to enable Discrete 2 of 5 decoding.
Sets the length of the Discrete 25 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Reference Manual
Disable
Disable
Disable
Disable
Max / Min
Length
(4-55)
Enable
Enable
Max / Min
Length
(4-55)
Enable
Enable
Enable
Enable
Max / Min
Length
(4-55)