GE Multilin W650 Instruction Manual page 63

3 HARDWARE
TYPE OF COMMUNICATION
RS485 / CAN cable
IRIG B
Plastic fiber optic
Ethernet 10/100 UTP (10/100BaseTX)
Glass fiber optic (100BaseFX)
Ethernet 100 FX (100BaseFX)
CAN Fiber
Communication boards are installed at the rear part of the unit, the upper port being reserved for the asynchronous
communications board and CAN, and the lower port for the ETHERNET board in any of its configurations.
Figure 3–8: DETAIL OF INSERTION/EXTRACTION OF COMMUNICATION MODULES
The transformers module with the VTs and CTs is already connected to a female connector screwed to the case
that incorporates shorting bars in the current inputs, so that it can be extracted without the need to short-circuit
the currents externally. It is very important, for safety reasons not to change or swift the terminals for CTs and VTs.
GEK-113032A
Figure 3–7: COMMUNICATIONS MEDIA SELECTOR GUIDE
W650 Wind Generator Protection System
3.3 MECHANICAL DESCRIPTION
CONNECTOR
Plug-in, 3 poles.
Plug-in, 2 poles.
Versatile Link
RJ45, Class 5.
ST
ST
ST
3
3-7