Danfoss DHP-A Installation Manual page 13

Installation Guide
3.4.2 Space requirement
3.4.3 Unpacking
The outdoor unit is packed and delivered in a crate.
1. Unpack the unit from the crate.
2. Check that the delivery contains the following:
▪ Outdoor unit
▪ Front cover
▪ Cover
▪ Disassembled stand
▪ Necessary screws, nuts and washers
3.4.4 Installation
Assemble the stand
1
1. Screw the two horizontal struts together (2) using the two ends (1) as illustrated below. Use 10 x M6x10 screws. The curved edges of
the horizontal struts must be facing inwards.
2. Screw the adjustable feet (3) into the holes under the ends.
Danfoss Heating Solutions
Domestic heat pumps
300 mm
300 mm
2
3
300 mm
1500 mm
1
VMGFQ102
1 Ends
2 Strut
3 Feet
13