Main Frame Assembly; Cover Exit Rear - Xerox WorkCentre Pro 412 Service Manual

Disassembly and Reassembly

6-13 Main Frame Assembly

1. Before you remove the LSU, you should remove:
- Rear cover (see page 6-3).
- Scanner assembly (see page 6-4).
- Side cover assembly (see page 6-9).
- Exit assembly (see page 6-12).
- LSU (see page 6-15).
- SMPS (see page 6-15).
2. Unplug the all connectors.

6-14 Cover Exit Rear

1. Remove the one screw and cover exit rear, as
shown below.
6-14
3. Remove the six screws and take out the main
frame assembly.
August 2001
Main Frame Ass'y
Cover Exit Rear
WorkCentre Pro 412
Launch Issue