Smps; Lsu - Xerox WorkCentre Pro 412 Service Manual

6-11 SMPS

1. Before you remove the LSU, you should remove:
- Rear cover (see page 6-3).
- Scanner assembly (see page 6-4).
- Side cover assembly (see page 6-9).
- Exit assembly (see page 6-12).
2. Unplug the all connectors.

6-12 LSU

1. Before you remove the LSU, you should remove:
- Rear cover (see page 6-3).
- Scanner assembly (see page 6-4).
- Side cover assembly (see page 6-9).
- Exit assembly (see page 6-12).
2. Unplug the two connectors.
WorkCentre Pro 412
Launch Issue
3. Remove the SMPS, as shown below.
3. Remove the four screws and take out the LSU.
August 2001
Disassembly and Reassembly
6-13