Siemens simatic et200sp Manual page 95

Accuracy class to IEC 61557-12
•
•
•
•
•
•
•
•
•
•
•
Electrical isolation
Electrical isolation of channels
Between the channels and backplane bus
Insulation
Insulation tested with
Ambient conditions
Ambient temperature in operation
Horizontal mounting position, min.
Horizontal mounting position, max.
Vertical mounting position, min.
Vertical mounting position, max.
Dimensions
Width
Weights
Weight (without packaging)
Miscellaneous
Current transformer selection data
Cable length (clamp-type transformer) depending
on Zn and Imax
ATEX approval
In accordance with EN 60079-15 (Electrical apparatus for potentially explosive atmospheres;
Type of protection "n") and EN 60079-0 (Electrical apparatus for potentially explosive gas
atmospheres - Part 0: General Requirements)
Dimension drawing
See ET 200SP BaseUnits (http://support.automation.siemens.com/WW/view/en/59753521)
manual
Analog input module AI Energy Meter 480VAC ST (6ES7134-6PA20-0BD0)
Manual, 12/2015, A5E36061895-AA
Measured variable voltage
Measured variable current
Measured variable apparent power
Measured variable active power
Measured variable reactive power
Measured variable power factor
Measured variable active energy
Measured variable reactive energy
Measured variable neutral current
Measured variable phase angle
Measured variable frequency
Technical specifications
14.1 Technical specifications
6ES7134-6PA20-0BD0
0.2
0.2
0.5
0.5
1
0.5
0.5
1
0.5. Calculated
+/-1°. Not covered by IEC 61577-12
0.05
Yes. 3700 VAC (type test) CATIII
2300 VAC 1 min. (type test)
0 °C
60 °C
0 °C
50 ℃
20 mm
45 g
200 m
95