Siemens simatic et200sp Manual page 75

Measured value data records
Through the measured value data records DS 142, DS 147, DS 148 and DS 149 you can
evaluate the following measured values for each phase of an AC / three-phase network:
● Quality information
● Current and voltage
● Minimum current and minimum voltage
● Maximum current and maximum voltage
● Active, reactive and apparent power
● Minimum active, reactive and apparent power
● Maximum active, reactive and apparent power
● Active, reactive and apparent energy
● Minimum active, reactive and apparent energy
● Maximum active, reactive and apparent energy
● Power factor
● Minimum power factor
● Maximum power factor
You can find the structure of the measured value data records in section Measured value
data record for phase-based measured values L1 (DS 147) (Page 166).
See also
Measured value data record for phase-based measured values L2 (DS 148) (Page 167)
Measured value data record for phase-based measured values L3 (DS 149) (Page 169)
Minimum and maximum values (Page 71)
User data variants with 32 bytes input data / 12 bytes output data (Page 135)
Overview of all measured value data records (Page 155)
Analog input module AI Energy Meter 480VAC ST (6ES7134-6PA20-0BD0)
Manual, 12/2015, A5E36061895-AA
Phase-based measured values
11.1 Phase-based measured values
75