Module Versions At Configuration With Gsd File - Siemens simatic et200sp Manual

Configuration / address space
4.2 Selecting the module versions
4.2.2

Module versions at configuration with GSD file

Module versions with fixed user data assignment
Module ver- User data
sion
2 I / 2 Q No cyclic user data.
Access to measured
values through "Read
data record".
E0 User data in accordance
with EE@Industry meas-
urement data profiles
E1
E2
E3
Module versions with selectable user data variants
Module ver- User data
sion
32 I / 12 Q User data selectable
through user data variants
or through user-specific
64 I / 12 Q
user data*
128 I / 12 Q
256 I / 12 Q
*Ensure that the user data do not exceed the size of the address space of the module version. If necessary, use a module
version with a larger address space
28
Address space
2-byte inputs
2-byte outputs
12 byte inputs /
12 byte outputs
4 byte inputs /
12 byte outputs
12 byte inputs /
12 byte outputs
104 byte inputs /
12 byte outputs
Address space
32 byte inputs /
12 byte outputs
64 byte inputs /
12 byte outputs
128 byte inputs /
12 byte outputs
256 byte inputs /
12 byte outputs
Analog input module AI Energy Meter 480VAC ST (6ES7134-6PA20-0BD0)
Comment
Information about the structure of the 2 I / 2 Q
module version is available in the appendix Mod-
ule version "2 I / 2 Q" (Page 122).
Information about the structure of the
EE@Industry measured data profiles is available
in the appendix Module version "EE@Industry
measurement data profile E0 / E1 / E2 / E3"
(Page 133).
Comment
You can change over the user data variant during
operation.
If you use user-specific user data, you write your
measured value profile into the AI Energy Meter
480VAC ST with the data record 130. To do this
use the WRREC instruction. Information about the
structure of data record 130 is available in appen-
dix Structure of the parameter data record 130 for
user-data mapping (Page 110).
Manual, 12/2015, A5E36061895-AA