TGB 525 Service Manual page 78

To this chapter contents
16. REAR BRAKE & REAR WHEEL & REAR CUSHION
Remove rear axle housing 4 bolts.
Remove rear axle housing
Inspection
Check bearings on rear wheel axle bearing seat.
Rotate each bearing's inner ring with fingers.
Check if bearings can be turned in smooth and
silent, and also check if bearing outer ring is
mounted on bearing seat.
If bearing rotation is uneven, noising, or loose
bearing mounted, then replace it.
Check oil seal for wear or damage, and replace it if
necessary.
Caution
● Never install used bearings. Once bearing
removed, it has to be replaced with new one.
16-7
PDF created with pdfFactory Pro trial version www.pdffactory.com