Switch / Horn - TGB 525 Service Manual

17. ELECTRICAL SYSTEM

Switch / Horn

Main Switch
Inspection
Remove the front center cover.
Disconnect the main switch coupler.
Check the continuity between two points as
indicted below:
Pin
Position
OFF
ON
Wire Color
Replacement of main switch
Disconnect the coupler of the main switch.
Push out the main switch.
Align the main switch stopper with the meter cover
groove, and install main switch.
Install the main switch coupler.
Handle switches
Disconnect the coupler of handle from front fender
left side.
Check the continuity between two points as
indicated in the table below.
Start Switch
Pin
Position
FREE
Wire Color
17-16
PDF created with pdfFactory Pro trial version
To this chapter contents
BAT1 BAT2
Red/White Brown/Blue
ST SG
Blue
/ White
Black
www.pdffactory.com
Main switch coupler
Headlight switch couplers
Start switch