Troubleshooting - Safescan 6155 User Manual

13. TROUBlEShOOTInG

SYMBOl
Overload condition: Too much weight is
placed on the money hook.
The 'Warning' symbol will appear on the
display if you press any key before the
currently counting process is finished.
The 9 Volt Battery (IEC Type 6LR61) is low
on power.
At start up the scale displays: Out 2.
OUT2
The money counter is not placed on a stable
UNST
and level surface.
14. TEChnICal SPECIFICaTIOnS
• Currency: all banknotes and coins.
• Display: 2,2 inch LCD display with white backlight.
• Max weighing capacity: 1 kg
• Machine size: 230(L) × 140(W) × 100(h) mm.
• Net weight: 0,7 kg
• Power Source: 9V DC adapter or 9 Volt Battery (IEC Type 6LR61)
• Print port: RJ45 Serial, Baud rate 9600
• Rohs/CE/EMC/REACh
10
PROBlEM SOlUTIOn
Free weighing mode:
Do not exceed the maximum weight of 1 kg
Counting coins:
When the max weight is exceeded, take some
coins off the cup to reduce the weight. Wait
for the beep and press the
the results. Use the
same coin denomination to count and store
the remaining coins.
Counting banknotes:
Place a stack of 15-20 banknotes on the
scale, wait for the beep and place the next
stack of 15-20 notes on top of the previous
stack, wait for the beep. Repeat until all notes
of the denomination are counted. Press
key to store the results.
Take the money off the hook and the ma-
chine will reset automatically.
Replace the battery or use the adapter.
Follow the calibration procedure
(See: 2.0 BEFORE YOU START).
Make sure the machine is placed on a level
surface and that no surrounding objects
have direct contact with the money hook or
coin cup.
key to store
keys to return to the