Advertisement
Advertisement
Table of Contents
Related Manuals for Safescan 2210
Summary of Contents for Safescan 2210
- Page 1 USER MANUAL SAFESCAN 2210 / 2250 BANKNOTE COUNTER www.safescan.com...
- Page 2 ENGLISH INTRODUCTION Thank you for purchasing a Safescan 2200-series banknote counter. This user manual will help you to get started with your Safescan banknote counter and describes the setup and operating procedures. We recommend that before using the device you carefully read these operating instructions.
-
Page 3: Available Accessories
05. Decrease input value by 1 06. UV feature detection on/off Enter UV sensitivity level adjustment menu 07. Safescan 2210: Select auto or manual start Safescan 2250: MG feature detection on/off Enter MG sensitivity level adjustment menu (Safescan 2250) AUTO 08. - Page 4 Switch on the banknote counter by pushing the power Default banknote feature detection settings: Safescan switch at the back in the “1” position. 2210: UV, 2250: UV and MG. These can be switched on or off by pressing the UV and/or MG* button. (* Safescan 2250 only) READY FOR COUNTING The machine is now ready for basic counting.
-
Page 5: Counting Banknotes
You can choose whether you want the device to start counting automatically or manually (counting starts after pressing the [START] button). Safescan 2210: press the AUTO button to activate/de-activate the auto start function. This will be shown in the display. AUTO AUTO Safescan 2250: press the START button for 3 seconds to activate/de-activate the auto start function. - Page 6 The error concerns the last counted banknote in the stacker. The following messages are possible: There is a problem with the UV features. There is a problem with the magnetic features (Safescan 2250 only) A banknote with a different thickness has been detected, or A banknote with a different height than the first counted 2 banknotes may be stuck together (“double note detection”)
- Page 7 The BATCH function enables you to create equal stacks of a pre-set number of banknotes. The counter will stop counting when the set batch number has been reached. You can set the batch number as follows: Press the BATCH button to activate the function. The indicator in the display lights up, including 2 blinking arrows. AUTO AUTO www.safescan.com...
- Page 8 2.2. Navigate through the pre-set batch numbers by pressing the BATCH button again. The sequence is: AUTO 100 > 50 > 20 > 10 > Batch off. AUTO 2.3. AUTO Use the arrow keys to increase or decrease the batch number by 1 piece, starting from the number that is shown. When the display shows ‘100’, you can go to 101, 102 etc.
- Page 9 2 blinking arrows. See (5) for adjustment procedure. 2. MG Safescan 2250 only: Pressing the MG button for 3 seconds will activate the MG sensitivity level menu. The default level is shown, including 2 blinking arrows. See (5) for adjustment procedure.
-
Page 10: Reset To Default Factory Settings
Press START to confirm the set level. RESET TO DEFAULT FACTORY SETTINGS To return to factory default settings: Press and hold [CLR] . The machine will sound a “beep” to confirm that the factory default settings have been restored. www.safescan.com... -
Page 11: Troubleshooting
(EA2 error) and/or that no startup banknotes or other objects are blocking any internal parts of the machine. When the error message remains, contact Safescan technical support for assistance. HOPPER ADJUSTMENT WHEEL When thickness counting errors occur frequently, or when banknotes are not being fed smoothly through the machine, it may be necessary to adjust the hopper adjustment wheel. -
Page 12: Maintenance
MAINTENANCE The Safescan 2210 / 2250 is a high precision device. To ensure that operation and reliability remain at an optimal level, it is important to clean the machine frequently. Use an air-duster to remove dust and dirt. Clean the hopper and stacker with the included dry brush. -
Page 13: Technical Specifications
ENGLISH THE USE OF BANKNOTE COUNTER CLEANING CARDS (OPTION) You can also use the Safescan banknote counter cleaning cards (partno. 136-0546) to clean the roller wheels and magnetic sensors. TECHNICAL SPECIFICATIONS Supported currencies: All currencies Counting speed: 1000 banknotes/minute Banknote feature detection:... - Page 14 SAFESCAN® is a registered trademark of Solid Control Holding B.V. No part of this manual may be reproduced in any form, by print, copy or in any other way without prior written permission of Solid Control Holding B.V. Solid Control Holding B.V.