Related Manuals for Safescan 2610
Summary of Contents for Safescan 2610
- Page 1 USER MANUAL ENGLISH | NEDERLANDS | DEUTSCH | FRANÇAIS | ESPAÑOL | ITALIANO | PORTUGUÊS | POLSKI | ČESKY | MAGYAR | SLOVENSKÝ SAFESCAN 2610 / 2650 BANKNOTE COUNTER www.safescan.com...
- Page 2 ENGLISH INTRODUCTION Thank you for purchasing a Safescan 2600-series banknote counter. This user manual will help you to get started with your Safescan banknote counter and describes the setup and operating procedures. We recommend that before using the device you carefully read these operating instructions.
-
Page 3: Available Accessories
ENGLISH AVAILABLE ACCESSORIES • S afescan Cleaning Cards for banknote counters (pack of 20 cards), partnumber 136-0546. See www.safescan.com for details. SAFESCAN 2610 / 2650: FEATURES BANKNOTE FEATURE DETECTION UV feature UV and MG SIZE (height) n alignment detection feature detection in ‘sort’... -
Page 4: Getting Started
Default banknote feature detection settings: Safescan switch at the back in the “1” position. 2610: UV / Safescan 2650: UV and MG. These can be changed: by pressing the DETECT button. The sequence is UV -> UV + MG* -> No detection... -
Page 5: Counting Banknotes
In COUNT mode, banknotes do not need to be sorted. Please be advised that in this mode the device simply counts the number of notes that are being fed through the machine, no matter which denominations are in the stack of notes. www.safescan.com... - Page 6 The counter will only detect banknotes with a different height than the first banknote counted (minimum detectable height difference = 3mm). DI FFER ENT DE NO M I NAT IO N DI F FERENT D ENOM IN ATI ON www.safescan.com...
-
Page 7: Device Menu
ENGLISH DEVICE MENU In the device menu of the 2610 / 2650 you can define specific settings of the machine. To enter the menu, press the MENU button AU TO S O R T A LL The display now shows the various selectable menu items. -
Page 8: Menu Content
MENU CONTENT The structure of the menu is as follows: MODEL MODE DETECTION SPEED* SENSITIVITY LEVEL 2610 Count > Sort 1 > 2 > 3 UV > Height 2650 Count > Sort UV > MG > UV+MG 1 > 2 > 3 UV >... - Page 9 While the amount is blinking, you can navigate through the preset batch numbers by pressing the BATCH button again. The sequence is 100 > 50 > 20 > 10 > 5 > Batch off. AUT O S OR T BA TCH A UTO S OR T www.safescan.com...
-
Page 10: Error Messages
Remove the suspect banknote from the detected. Remove the banknote from the stacker and stacker and press START to continue. press START to continue (Safescan 2650 only). H E IGH T E R R O R D O U BL E N OT E S... -
Page 11: Troubleshooting
Ensure the banknotes are placed neatly and are error message through the machine. inserted centered on the hopper. Use the hopper shows guides to center the banknotes and when counting a large stack of banknotes, guide the notes also with your hands during counting. www.safescan.com... -
Page 12: Reset To Default Factory Settings
Your banknote counter has already been pre-configured with the optimal counterfeit detection settings. On rare occasions it could be required to manually adjust the sensitivty of one or more counterfeit detection settings. NOTE: only adjust these settings when being advised to do so by a Safescan technical expert. Counterfeit Detection type... -
Page 13: Maintenance
MAINTENANCE The Safescan 2610 / 2650 is a high precision device. To ensure that operation and reliability remain at an optimal level, it is important to clean the machine frequently. Use an air-duster to remove dust and dirt. Clean the hopper and stacker with the included dry brush. -
Page 14: Technical Specifications
Our support team is available by phone during office hours (GMT +1 timezone) or by e-mail to answer any question you may have regarding the usage of your Safescan device. See www.safescan.com for details. When calling or e-mailing our support center, always make sure you have the following information at hand: model number, partnumber, serial number (see product sticker at the bottom of the device), software version number (shown at startup of the device), date of purchase. - Page 15 SAFESCAN® is a registered trademark of Solid Control Holding B.V. No part of this manual may be reproduced in any form, by print, copy or in any other way without prior written permission of Solid Control Holding B.V. Solid Control Holding B.V. reserves all intellectual and industrial property rights such as any and all of their patent, trademark, design, manufacturing, reproduction, use and sales rights.
Need help?
Do you have a question about the 2610 and is the answer not in the manual?
Questions and answers