D-Link xStack DES-3526 Cli Manual page 54

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
NOTE: With autoconfig enabled, the Switch ipif settings now define the Switch as a
DHCP client. Use the show switch command to display the new IP settings status.
disable autoconfig
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To stop the autoconfiguration function:
DES-3526:4#disable autoconfig
Command: disable autoconfig
Success.
DES-3526:4#
show autoconfig
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To upload a:
DES-3526:4#show autoconfig
Command: show autoconfig
Autoconfig disabled.
Success.
DES-3526:4#
Use this to deactivate autoconfiguration from DHCP.
disable autoconfig
This instructs the Switch not to accept autoconfiguration instruction from the
DHCP server. This does not change the IP settings of the Switch. The ipif
settings will continue as DHCP client until changed with the config ipif
command.
None.
None.
Used to display the current autoconfig status of the Switch.
show autoconfig
This will list the current status of the autoconfiguration function.
None.
None.
51