D-Link xStack DES-3526 Cli Manual page 111

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
show lacp_port
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display LACP port mode settings:
DES-3526:4#show lacp_port 1-10
Command: show lacp_port 1-10
Port
------
1
2
3
4
5
6
7
8
9
10
DES-3526:4#
Used to display current LACP port mode settings.
show lacp_port {<portlist>}
This command will display the LACP mode settings as they are
currently configured.
<portlist> - Specifies a port or range of ports to be configured.
If no parameter is specified, the system will display the current LACP
status for all ports.
Only administrator-level users can issue this command.
Activity
--------
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
108