D-Link xStack DES-3526 Cli Manual page 31

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
create snmp user
Purpose Used to create a new SNMP user and adds the user to an SNMP group that is also
created by this command.
Syntax create snmp user <username 32> <groupname 32> {encrypted [by_password
auth [md5 <auth_password 8-16> | sha <auth_password 8-20>] priv [none |
des <priv_password 8-16>] | by_key auth [md5 <auth_key 32-32> | sha
<auth_key 40-40>] priv [none | des <priv_key 32-32> ]]}
Description The create snmp user command creates a new SNMP user and adds the user to
an SNMP group that is also created by this command. SNMP ensures:
Message integrity − Ensures that packets have not been tampered with during
transit.
Authentication − Determines if an SNMP message is from a valid source.
Encryption − Scrambles the contents of messages to prevent it from being viewed
by an unauthorized source.
Parameters <username 32> − An alphanumeric name of up to 32 characters that will identify the
new SNMP user.
<groupname 32> − An alphanumeric name of up to 32 characters that will identify
the SNMP group the new SNMP user will be associated with.
encrypted – Allows the user to choose a type of authorization for authentication
using SNMP. The user may choose:
•
•
auth - The user may also choose the type of authentication algorithms used to
authenticate the snmp user. The choices are:
•
•
priv – Adding the priv (privacy) parameter will allow for encryption in addition to the
authentication algorithm for higher security. The user may choose:
•
•
Restrictions Only administrator-level users can issue this command.
by_password – Requires the SNMP user to enter a password for
authentication and privacy. The password is defined by specifying the
auth_password below. This method is recommended.
by_key – Requires the SNMP user to enter a encryption key for authentication
and privacy. The key is defined by specifying the key in hex form below. This
method is not recommended.
md5 − Specifies that the HMAC-MD5-96 authentication level will be used. md5
may be utilized by entering one of the following:
<auth password 8-16> - An alphanumeric sting of between 8 and
16 characters that will be used to authorize the agent to receive
packets for the host.
<auth_key 32-32> - Enter an alphanumeric sting of exactly 32
characters, in hex form, to define the key that will be used to
authorize the agent to receive packets for the host.
sha − Specifies that the HMAC-SHA-96 authentication level will be used.
<auth password 8-20> - An alphanumeric sting of between 8 and
20 characters that will be used to authorize the agent to receive
packets for the host.
<auth_key 40-40> - Enter an alphanumeric sting of exactly 40
characters, in hex form, to define the key that will be used to
authorize the agent to receive packets for the host.
des – Adding this parameter will allow for a 56-bit encryption to be added
using the DES-56 standard using:
<priv_password 8-16> - An alphanumeric string of between 8 and
16 characters that will be used to encrypt the contents of messages
the host sends to the agent.
<priv_key 32-32> - Enter an alphanumeric key string of exactly 32
characters, in hex form, that will be used to encrypt the contents of
messages the host sends to the agent.
none – Adding this parameter will add no encryption.
28