D-Link xStack DES-3526 Cli Manual page 181

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
show authen_login
Restrictions
Example usage:
To view the authentication login method list named Trinity:
DES-3526:4#show authen_login method_list_name Trinity
Command: show authen_login method_list_name Trinity
Method List Name Priority
----------------
Trinity
DES-3526:4#
create authen_enable method_list_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a user-defined method list, named "Permit" for promoting user privileges to Administrator privileges:
15 characters to define the given method list the user wishes to view.
all – Entering this parameter will display all the authentication login
methods currently configured on the Switch.
The window will display the following parameters:
Method List Name – The name of a previously configured
method list name.
Priority – Defines which order the method list protocols will
be queried for authentication when a user attempts to log on
to the Switch. Priority ranges from 1(highest) to 4 (lowest).
Method Name – Defines which security protocols are
implemented, per method list name.
Comment – Defines the type of Method. User-defined Group
refers to server group defined by the user. Built-in Group
refers to the TACACS, XTACACS, TACACS+ and RADIUS
security protocols which are permanently set in the Switch.
Keyword refers to authentication using a technique
INSTEAD of TACACS / XTACACS / TACACS+ / RADIUS
which are local (authentication through the user account on
the Switch) and none (no authentication necessary to access
any function on the Switch).
None.
Method Name
-------- ---------------
1 tacacs+
2 tacacs
3 Darren
4 local
Used to create a user-defined method list of authentication methods
for promoting normal user level privileges to Administrator level
privileges on the Switch.
create authen_enable method_list_name <string 15>
This command is used to promote users with normal level privileges
to Administrator level privileges using authentication methods on the
Switch. Once a user acquires normal user level privileges on the
Switch, he or she must be authenticated by a method on the Switch
to gain administrator privileges on the Switch, which is defined by
the Administrator. A maximum of eight (8) enable method lists can
be implemented on the Switch.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the given enable method list the user wishes to create.
Only administrator-level users can issue this command.
178
Comment
---------
Built-in Group
Built-in Group
User-defined Group
Keyword