D-Link xStack DES-3526 Cli Manual page 216

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
To transfer the Switch to be a CS:
To update the name of a group:
download sim
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To download firmware:
DES-3526:4# download sim firmware 10.53.13.94 c:/des3526.had
members all
Command: download sim firmware 10.53.13.94 c:/des3526.had
members all
This device is updating firmware. Please wait...
Download Status :
DES-3526:4# config sim commander
Command: config sim commander
Success.
DES-3526:4#
DES-3526:4# config sim commander group_name Trinity
Command: config sim commander group_name Trinity
Success.
DES-3526:4#
Used to download firmware or configuration file to an indicated
device.
download sim [ firmware | configuration] <ipaddr>
<path_filename> {members <mslist> | all}
This command will download a firmware file or configuration file to a
specified device from a TFTP server.
firmware – Specify this parameter to download firmware to members
of a SIM group.
configuration - Specify this parameter to download a switch
configuration to members of a SIM group.
<ipaddr> – Enter the IP address of the TFTP server.
<path_filename> – Enter the path and the filename of the firmware or
switch on the TFTP server.
members – Enter this parameter to specify the members to which the
user prefers to download firmware or switch configuration files. The
user may specify a member or members by adding one of the
following:
<mslist> - Enter a value, or values to specify which members
of the SIM group will receive the firmware or switch
configuration.
all – Add this parameter to specify all members of the SIM
group will receive the firmware or switch configuration.
Only administrator-level users can issue this command.
213