D-Link xStack DES-3526 Cli Manual page 130

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
DES-3526:4# config igmp_snooping multicast_vlan trinity
member_port 1,3 source_port 2 state enable
Command: config igmp_snooping multicast_vlan trinity
member_port 1,3 source_port 2 state enable
Success.
DES-3526:4#
delete igmp_snooping multicast_vlan
Purpose Used to delete a multicast VLAN previously created on the switch.
Syntax delete igmp_snooping multicast_vlan <vlan_name 32>
Description This command will delete a multicast VLAN previously created on
the switch.
<vlan_name 32> − The name of the multicast VLAN to delete from
Parameters
the switch.
Restrictions You must have administrator privileges.
DES-3526:4#delete igmp_snooping multicast_vlan trinity
Command: delete igmp_snooping multicast_vlan trinity
Success.
DES-3526:4#
show igmp_snooping multicast_vlan
Purpose Used to show the settings for a multicast VLAN previously created
on the switch.
Syntax show igmp_snooping multicast_vlan {<vlan_name 32>}
Description This command display the settings for a multicast VLAN previously
created on the switch.
<vlan_name 32> − The name of a specific multicast VLAN for which
Parameters
to view settings.
Restrictions You must have administrator privileges.
DES-3526:4#delete igmp_snooping multicast_vlan trinity
Command: delete igmp_snooping multicast_vlan trinity
VID
Member ports
Source ports
Status
DES-3526:4#
Note: Once a Multicast VLAN has been configured and enabled on the switch, other IGMP Snooping
settings will be overridden and the IGMP Snooping Multicast VLAN will take precedence.
: 2
: 1,3
: 2
: Enabled
127