D-Link xStack DES-3526 Cli Manual page 135

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
Example usage:
To show a single IP destination of the DHCP relay configuration:
enable dhcp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable DHCP relay:
disable dhcp_relay
Purpose
Syntax
Description
Parameters
Restrictions
DES-3526:4#show dhcp_relay
Command: show dhcp_relay
DHCP/BOOTP Relay Status
DHCP/BOOTP Hops Count Limit
DHCP/BOOTP Relay Time Threshold
DHCP Relay Agent Information Option 82 State : Enabled
DHCP Relay Agent Information Option 82 Check : Enabled
DHCP Relay Agent Information Option 82 Policy : Replace
Interface Server 1
------------ --------------- --------------- --------------- --------------
System 10.58.44.6
DES-3526:4#
DES-3526:4#show dhcp_relay ipif System
Command: show dhcp_relay ipif System
Interface Server 1
------------ --------------- --------------- --------------- --------------
System 10.58.44.6
DES-3526:4#
Used to enable the DHCP/BOOTP relay function on the switch.
enable dhcp_relay
This command is used to enable the DHCP/BOOTP relay function on the
switch.
None.
Only administrator-level users can issue this command.
DES-3526:4#enable dhcp_relay
Command: enable dhcp_relay
Success.
DES-3526:4#
Used to disable the DHCP/BOOTP relay function on the switch.
disable dhcp_relay
This command is used to disable the DHCP/BOOTP relay function on the
switch.
None.
Only administrator-level users can issue this command.
Server 2 Server 3
Server 2 Server 3
132
: Enabled
: 2
: 23
Server 4
Server 4