D-Link xStack DES-3526 Cli Manual page 34

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
DES-3526:4#delete snmp view dlinkview all
Command: delete snmp view dlinkview all
Success.
DES-3526:4#
show snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNMP view configuration:
DES-3526:4#show snmp view
Command: show snmp view
Total Entries: 11
DES-3526:4#
create snmp community
Purpose
Syntax
Used to display an SNMP view previously created on the Switch.
show snmp view {<view_name 32>}
The show snmp view command displays an SNMP view
previously created on the Switch.
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be displayed.
None.
Vacm View Table Settings
View Name
--------------------
ReadView
WriteView
NotifyView
restricted
restricted
restricted
restricted
restricted
CommunityView
CommunityView
CommunityView
Used to create an SNMP community string to define the relationship
between the SNMP manager and an agent. The community string acts like
a password to permit access to the agent on the Switch. One or more of the
following characteristics can be associated with the community string:
An Access List of IP addresses of SNMP managers that are permitted to
use the community string to gain access to the Switch's SNMP agent.
An MIB view that defines the subset of all MIB objects that will be
accessible to the SNMP community.
read_write or read_only level permission for the MIB objects accessible to
the SNMP community.
create snmp community <community_string 32> view <view_name 32>
[read_only | read_write]
Subtree
-------------------------
1
1
1.3.6
1.3.6.1.2.1.1
1.3.6.1.2.1.11
1.3.6.1.6.3.10.2.1
1.3.6.1.6.3.11.2.1
1.3.6.1.6.3.15.1.1
1
1.3.6.1.6.3
1.3.6.1.6.3.1
31
View Type
----------
Included
Included
Included
Included
Included
Included
Included
Included
Included
Excluded
Included