D-Link xStack DES-3526 Cli Manual page 138

Layer 2 managed stackable fast ethernet switch
Hide thumbs Also See for xStack DES-3526:
Table of Contents

Advertisement

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
disable 802.1x
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable 802.1x on the Switch:
DES-3526:4#disable 802.1x
Command: disable 802.1x
Success.
DES-3526:4#
show 802.1x auth_configuration
Purpose
Syntax
Description
Parameters
DES-3526:4#enable 802.1x
Command: enable 802.1x
Success.
DES-3526:4#
Used to disable the 802.1x server on the Switch.
disable 802.1x
The disable 802.1x command is used to disable the 802.1x Network
Access control server application on the Switch. To select between port-
based or MAC-based, use the config 802.1x auth_mode command.
None.
Only administrator-level users can issue this command.
Used to display the current configuration of the 802.1x server on the
Switch.
show 802.1x auth_configuration {ports <portlist>}
The show 802.1x user command is used to display the 802.1x Port-
based or MAC-based Network Access control local users currently
configured on the Switch.
ports <portlist> − Specifies a port or range of ports to view.
The following details are displayed:
802.1x Enabled / Disabled − Shows the current status of 802.1x
functions on the Switch.
Authentication Mode – Shows the authentication mode, whether it be
by MAC address or by port.
Authentication Protocol: Radius_Eap − Shows the authentication
protocol suite in use between the Switch and a RADIUS server. May
read Radius_Eap or Radius_Pap.
Port number − Shows the physical port number on the Switch.
Capability: Authenticator/None − Shows the capability of 802.1x
functions on the port number displayed above. There are two 802.1x
capabilities that can be set on the Switch: Authenticator and None.
AdminCtlDir: Both / In − Shows whether a controlled Port that is
unauthorized will exert control over communication in both receiving
and transmitting directions, or just the receiving direction.
OpenCtlDir: Both / In − Shows whether a controlled Port that is
unauthorized will exert control over communication in both receiving
135

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack des-3526dc

Table of Contents